Addtime： 2020-07-18 Browse times： 2680
The actual production of Roots vacuum pump is carried out through each process. While strengthening the quality of the blank, it is also necessary to strictly carry out the deep processing. For the appearance of waste products, it is necessary to do a good job in the management system which is helpful to the production. In the case of not affecting the order production, the waste parts can be treated effectively, and the man hour quota should be controlled well On the basis of the basic work, we should timely respond to the needs of the market, and strengthen the optimization of product processing technology.
The application strength of Roots vacuum pump has become an important condition to promote the development of enterprise productivity. For its application, it has different application ability in different industries. However, the same point is that it can not be used as a single pump, but can only be assembled with other equipment into unit products for use, playing a driving strength foundation. Through the application performance of the equipment, it can be effective For the use of other equipment to achieve higher performance strength, improve the driving effect of product application.
On the premise of speeding up the development of Roots vacuum pump's practical effect, it is necessary to continuously reflect the strength of product application and performance, further enhance the promotion of its product advantages, let the application of its products drive the development of enterprise productivity, promote the continuous improvement of its application performance in all aspects, and fully accelerate the driving of its product application ability, so that it can be continuously reflected on the basis of reasonable use The outstanding performance of the product application effect, so as to reflect the applicable performance of the equipment.
In order to improve the quality of Roots vacuum pump, it is necessary to improve the development of its overall application strength combined with the application of the product, and constantly realize the overall driving force of the product application ability, so as to enhance the continuous improvement of its quality advantage under the advantage of reasonable use, and make it reflect the internal application advantage in the development process.
1. Low air pressure and high current: this kind of situation occurs more often, the main reason is that there is too much dust on the inlet filter screen of Roots vacuum pump, and the cleaning is not timely. If the filter screen is cleaned carefully, the problem will be solved. This requires us to clean the filter screen frequently in production to ensure the smooth inlet of Roots vacuum pump, which is not only conducive to the operation of the equipment, but also does not affect the calcination.
2. The impact between the impeller and impeller of Roots vacuum pump: the tooth displacement occurs; the elimination method is to adjust the clearance and tighten. Over rated pressure operation; troubleshooting method is to check the cause of overpressure and then eliminate. The clearance between impellers is changed due to the wear of tooth surface, and the elimination method is to adjust the clearance.
3. Roots vacuum pump shell vibration: reason one, in the use process did not do a good job in maintenance work. Reason two, roots drum vacuum pump use time is too long. When disassembling the machine, the matching dimensions of the machine shall be measured.
Scan QR code and add wechat
Download
Vacuum knowledge
Service
Contact us